1.32 US Gallon of 5G EMF Shielding Paint
*Does Not Include Free Shipping*
YShield Paint / RF Shielding Paint / EMF Shielding Paint, Carbon Based and Corrosion Resistant, Attenuation of 44 dB / 99.996 % with one coat.
Available in 1.06 Qt. and 1.32 Gal. Bins.
Our standard EMF/RF Shielding Paint for interior and exterior application based on a high quality pure-acrylic binder. This shielding paint offers a perfect compromise of excellent attenuation, high water resistance and ecological.
YShield Paint /EMF Shielding Paint/EMF Blocking Paint provides EMF shielding protection from high frequency radiation from wireless communications such as modems, DECT phones, television and radio stations and cell towers.
- 5G EMF Blocking Paint
- EMF shielding paint for interior application and exterior application
- Now monitored by TÜV-SÜD. The whole production process including quality control, emission behaviour and economical use of preserving agents is subject to monitoring.
- Excellent shielding qualities for protection against RF radiation, microwave and from low-frequency Electric Fields when grounded (does not shield low frequency magnetic fields)
- Attenuation of 44 dB in one layer (shielding effectiveness of 99.996 %).
- Electro-conductive coating, liquid water-based and Low-emission (0.18g/litre)
- High water resistance and environmentally friendly
- Apply as a prime coat and cover with interior paint or exterior paint
- Good adhesion on many surfaces and substrates such as latex paint, construction board, cement, plaster, polystyrene, masonry surfaces and more…
- Frost resistant in delivery form. Optimized for shipping to regions with low average temperatures or air shipments that may reach freezing
- Paint is black in color
- Corrosion resistant - contains no metallic particles
- Coverage: 215 - 430 Sq.Ft./1.32 Gal.
- Living areas: Protection from RF-Radiation (High Frequency EMF) from Cell Phone Towers, TV and radio broadcasting antennas, radar, DECT cordless phones, wireless networks etc.
- Protection against Low Frequency Electric Fields when grounded (does not shield low frequency magnetic fields, however)
- Industry: To prevent interception of data from wireless networks, and potentially bugged conference rooms
- Science and R&D: Shielding of electromagnetic interference (EMI) sensitive facilities and equipment
- Medicine: Protection against sensitive technical equipment. To guarantee important medical data is derived correctly and will not be altered by EMI
- Electronic Industry: To reduce induction and interference
- Underground: Apply to a clean dry degreased surface
- Further Applications: Schools, nurseries, hotel rooms, hospital rooms
- Detect, Protect and Verify: Three steps to achieving peace of mind
Grounding is recommended and is to be completed by a licensed electrician. Be sure to follow all local electrical codes and standards for grounding. The National Electrical Code does not address applying conductive paint to walls. However, because this product does not carry a UL or CSA listing, some electrical inspectors may not be comfortable approving the installation. An electrical engineer may be required to certify the installation. Check with your local inspector first. To ensure an adequate ground connection, we recommend using the YShield Grounding Kit GS2/GS3(interior) or GF4(exterior) and GSX Conductive Tape. Step by step instructions for the mounting of the Grounding Kit are included.
- Desired quantity of 1.32 Gal. Bins of YShield Paint
- Installation and Grounding Instructions
Additional Product Information:
CAUTION: This paint is electrically conductive. All painted areas must be grounded by a licensed electrician. All connections should be visually inspected and tested and comply with local electrical codes. In all shielded areas / shielded rooms a personal protection circuit-breaker should be installed. Always switch off power supply before starting to perform shielding work and before application of shielding paint. For ground only use YShield Ground-Connection ES/EB. Avoid contacting ground at other points.
WARNING: Like all electrical products and installations EMR-Shielding Products can and do pose a risk to consumer safety if improperly handled. YShield and Safe Living Technologies therefore disclaims all responsibility for damages to persons and material due to improper handling of YShield products.
NOTE: As there are various paints available worldwide, we can never give a guarantee for specific combinations. In addition, many purely mineral paints and ecological paints adhere poorly on the graphite surface of our shielding paints. We always recommend applying a test coating on a sampling area before processing.
Our paint has a very low VOC content and others may as well but they still may not be compatible with an environmentally sensitive person. If this is a concern, we would suggest testing various paints being used for environmental compatibility on their own and combined together in an small area before starting your paint project.
- 44 dB per layer- 99.996%
- Electrical Resistance:
- 7.5 Ohm per sq inch
- Minimum Application Temperature:
- +5°C / 41°F
- 3.2 lb / liter
- Typical Coverage:
- 215 - 430 Sq.Ft./1.32 Gal.
- Shelf Life:
- 12 months, unopened
- Binding Agent:
- Pure Acrylic
- Screening Agent:
Great paint. Really protects from RF. Easy on. Almost no VOC smell. (I am MCS)
Needed to paint the exterior of my house due to having a 4G and 5G antenna placed within line of sight and 200-300 feet. Applied 2 coats on james hardie fiber-cement board siding. Before application, readings inside were around 15,000 microwatts per sq meter. After application of the two coats readings were around 800. Most likely due to leakage from the roof/ceiling. Very good product. Grounding is important, as well as keeping in mind that it is much thicker than regular paint, but also washes more easily from hands than regular paint.